2015年4月28日火曜日

AE86 Toreno engine Removed

やっとエンジンが落とせました。
エンジンは、メインバーに乗っているので、
メインバーと下ろせば、持ち上げる事なしに
エンジンを下ろせると考えおろしてみました。

エンジンをストラットのトップに渡したパイプの吊り下げメインバーの4本のボルトを緩めるとエンジンが下に降りてきますので、台車に載せて引き出しました。
ボディは壊れようが問題ないのでこのようなことが可能です。

 


 


Finally the engine it was removed 
Engine, since it is riding on the main bar, 
if down the main bar, without lifting 
it tried grated considered removing  the engine. Since the loosening the four bolts in the main bar and hanging of the pipe passes the engine to the top of the strut engine it will come down to the bottom, was pulled out is placed on the truck. Because the body will be broken but no problem can be such a thing.





0 件のコメント:

コメントを投稿

XYZプリンティング da Vinci ダヴィンチ 2.0A Duo & Ultimaker cloneのプロジェクト再スタート

 ダヴィンチ 2.0Aは、Marlinに」コントロールボードを変えるプロジェクトは止まっていました、しかしふとしたきっかけで、再び始めました。 きっけか 1、ダビンチにカスタマイズしたV1.1のConfig.h(重要な設定ファイル)を見つけた。 AIによるステップバイステップ(O...